Swine Production

APPLICATIONS

Swine Production

SwineFollow General Instructions to remove swine and clean the area to be disinfected. Use a 1% solution of KMPS for cleaning and disinfecting farrowing units, nurseries, finisher houses, processing plants, and agricultural production equipment such as trucks, rubber boots and associated livestock equipment. Saturate surfaces with a 1% solution with a cloth, mop, mechanical spray or sponge for a period of 10 minutes. Allow surfaces to air dry. Rinse waterers and feeders with potable water before reuse.

GENERAL INSTRUCTIONS: FARM PREMISES, ANIMAL HOUSING BUILDINGS AND FARM EQUIPMENT

  1. Remove all animals and feed from premises, vehicles and enclosures. Remove all litter and manure from floors, walls and surfaces of barns, pens, stalls, chutes and other facilities and fixtures occupied or traversed by animals. Empty all troughs, racks, and other feeding and watering appliances.

  2. Thoroughly clean all surfaces with detergent and rinse with water.

  3. Saturate all surfaces with the appropriate disinfection solution. Surfaces must remain wet for 10 minutes.

  4. Immerse all animal handling equipment and forks, shovels, and scrapers used for removing litter and manure in the appropriate disinfection solution for 10 minutes. Allow to air dry.

  5. Ventilate buildings and other closed spaces. Do not house animals or livestock or use equipment until the disinfection solution has been absorbed, set, or dried.

  6. Thoroughly scrub treated feed racks, troughs, automatic feeders, and waterers with detergent and rinse with potable water before reuse.

MIXING INSTRUCTIONS

AREAS DILUTION RATE APPLICATION
Farm premises including floors, walls of barns, pens stalls, etc. 1:100 Saturate surfaces with a 1% solution of KMPS with a cloth, mop, mechanical spray, or sponge and allow to sit for a period of 10 minutes. Allow surfaces to air dry. Rinse waterers and feeders with potable water before reuse.
Agricultural production equipment such as trucks, rubber boots and associated livestock equipment and instruments. 1:100 Saturate surfaces with a 1% solution of KMPS with a cloth, mop, mechanical spray, or sponge and allow to sit for a period of 10 minutes. Allow surfaces to air dry. Rinse waterers and feeders with potable water before reuse.
Routine disinfection of equipment and tools. 1:100 Using a pressure washer, brush or cloth, thoroughly wash all equipment in KMPS solution until visibly clean. Do not immerse metal objects for long periods. 10 minutes is maximum contact time.

NOW WELCOMING DISTRIBUTORS!